Possible incompatibility w/PowerSDR V2.4.4, Windows 8.1

[k1qn]

Not a hiccup. I was on 20M PeaberryCW and 40M digital with HDSDR last night. I copied and pasted the entire first post on this thread to the Yahoo powersdr group.

One thing I miss from PowerSDR is the ability to see the entire 90kHz spectrum/waterfall display. I can only get about 40kHz with HDSDR. Am I missing something?

[W4MMP]

Al,

Set the band width to 96000 in the bandwidth menu and decrease the zoom in the RF window to zero. The most I have been able to see in the audio window (lower window) is 48K even with a 96K audio adapter.

Screenshot 2015-07-29 11.48.36_cr-a.jpg (146.42 KiB) Viewed 3526 times

[k1qn]

I checked. I'm running V2.7 (up to date). Still only showing 50kHz

ScreenshotHDSDR.jpg (193.37 KiB) Viewed 3526 times

I only need 5kHz on the lower screen. This is the audio VAC line. I normally set the rate there to 12 kHz.

>now< what am I doing wrong?

[k1qn]

I have it now. Audio input from Peaberry set wrong.

[k1qn]

Perfect operation for about a week. I don't even check the RF output any more. Hurray for HDSDR!

[W4MMP]

On Windows, HDSDR is your friend. I have tried all the windows based SDR applications and hands down it is the easiest, most intuitive application available. It does not have all the bells and whistles but what it does, it does very well. But alas HDSDR development appears to have gone the way of the Peaberry V2. There has not been an update since November of 2013.