HDSDR Image Rejection

General discussion and support for the Peaberry SDR V2.

HDSDR Image Rejection

Postby 2E1CLS » Wed Apr 15, 2015 5:52 pm

Hi, I am really struggling to remove Images using Channel Adjustment Panel in HDSDR! I am using the RAW sliders and get no reduction what so ever, The image is as strong as the actual signal! Any sugestions?

Thanks Carl.
2E1CLS
 
Posts: 7
Joined: Tue Apr 14, 2015 10:23 pm

HDSDR Image Rejection

Postby 2E1CLS » Wed Apr 15, 2015 6:13 pm

Hi, I am really struggling to remove Images using Channel Adjustment Panel in HDSDR! I am using the RAW sliders and get no reduction what so ever, The image is as strong as the actual signal! Any sugestions?

Thanks Carl.
2E1CLS
 
Posts: 7
Joined: Tue Apr 14, 2015 10:23 pm

Re: HDSDR Image Rejection

Postby AE9RB » Thu Apr 16, 2015 4:22 pm

VINL/VINR carry the I/Q data in analog form. You have a soldering error keeping one of them from working. Could be anywhere from U6 to U10.
73 David AE9RB
AE9RB
Site Admin
 
Posts: 511
Joined: Thu Nov 15, 2012 5:27 am
Location: Portland, Oregon, USA (CN85ql)

Re: HDSDR Image Rejection

Postby 2E1CLS » Sat Apr 18, 2015 9:31 pm

AE9RB wrote:VINL/VINR carry the I/Q data in analog form. You have a soldering error keeping one of them from working. Could be anywhere from U6 to U10.



Thanks David, I have checked and checked for the bad joint but it all seems to looks fine, Also the sliders don't work for tx either.
2E1CLS
 
Posts: 7
Joined: Tue Apr 14, 2015 10:23 pm

Re: HDSDR Image Rejection

Postby W4MMP » Sat Apr 18, 2015 10:02 pm

Hi,
What happens if you set HDSDR to "auto"? I have never had much luck with the sliders either.
73
Ron / W4MMP
W4MMP
 
Posts: 579
Joined: Fri Jan 03, 2014 3:31 pm
Location: Lovettsville, Virginia FM19EG

Re: HDSDR Image Rejection

Postby 2E1CLS » Tue Apr 21, 2015 10:29 pm

Still struggling with this! I have not found a single bad solder joint so pretty sure I can rule that out, should mention my radio is a V1 rev A.

I tried Auto but nothing changes, I'm not sure the sliders work on tx either but that's to be expected? any more pointers?

Thanks Carl.
2E1CLS
 
Posts: 7
Joined: Tue Apr 14, 2015 10:23 pm

Re: HDSDR Image Rejection

Postby kz1x » Wed Apr 22, 2015 12:27 am

I was wondering if you were talking about the same radio here.

Since this is the V2 support forum and you have the earlier version, which was substantially different, we probably should re-map our advice parameters!

The V1 unit uses external sound in-and-out, for those here wondering. It has two audio jacks, and works much like the similar Ensemble RXTX.
http://fivedash.com/index.php?main_page=product_info&products_id=7

I also have a V1 Peaberry, in addition to my newer units. Perhaps if we create a thread in the V1 support forum that could better help zero-in on your actual problem.
kz1x
 
Posts: 232
Joined: Wed Aug 07, 2013 1:28 am

Re: HDSDR Image Rejection

Postby 2E1CLS » Wed Apr 22, 2015 11:46 am

Thanks I have started a new thread in the V1 section.
2E1CLS
 
Posts: 7
Joined: Tue Apr 14, 2015 10:23 pm


Return to Peaberry SDR V2

Who is online

Users browsing this forum: No registered users and 1 guest

cron