need help IDing some parts
3 posts
• Page 1 of 1
need help IDing some parts
by KD9BFS » Sat Apr 18, 2015 4:17 pm
I've made a tiny amount of progress on my kit ( inductors wound and capacitors on the bottom finished) but I am ready to get started on the front and I can't figure out which component is F1 and D1-3.
- KD9BFS
- Posts: 1
- Joined: Fri Apr 10, 2015 11:42 pm
Re: need help IDing some parts
by W4MMP » Sat Apr 18, 2015 5:43 pm
Hi,
F1 is a green SMT that is larger than the other resistors and capacitors. The diodes are black but again larger than the resistors and capacitors. The build instructions are pretty clear on how to identify them.
F1 is a green SMT that is larger than the other resistors and capacitors. The diodes are black but again larger than the resistors and capacitors. The build instructions are pretty clear on how to identify them.
73
Ron / W4MMP
Ron / W4MMP
- W4MMP
- Posts: 579
- Joined: Fri Jan 03, 2014 3:31 pm
- Location: Lovettsville, Virginia FM19EG
Re: need help IDing some parts
by kz1x » Sat Apr 18, 2015 7:55 pm
Well, besides the color, there's only one fuse - but three diodes.
- kz1x
- Posts: 232
- Joined: Wed Aug 07, 2013 1:28 am
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests