New feature?

[kb3cuf]

I am a CW op, and trying to get HDSDR to work. I am going to hack a USB keyboard for contact closures on the enter key, using Radio output jack- that will probably work OK. I'd love it if the Iambino had a PTT activation output. The current HDSDR uses space bar as a latching TX. I am planning on adding to the Iambino code to implement the function in semi breakin fashion- TX will get toggled on (eqiv to a keypress- at the spacebar) at the first dit or dah and "kept alive until 1/2 second has gone by without any input. then the TX gets toggled off same way.

The other idea is using CAT>HDSDR and toggling a pin on the RS232- it remains to be seen if the pin is held high during the entire sending or if it is bang bang again.

I think there are 2 I/O pins uncomitted on the Arduino.

Thoughts, anyone?

73
DE KB3CUF

[AE9RB]

Yes, AD4 and AD5 pins are completely unused. These can be used for either analog input or digital I/O. You can buy an Arduino prototype shield and easily put it between the Arduino and keyer shield.

If you have an Arduino Leonardo then you don't need to hack up an actual keyboard or add circuits. Just use the Keyboard class.

[AE9RB]

[kb3cuf]

Thanks for the code. I have a Leonardo inbound. I found the exact same results with my testing last night. Above 12-13 WPM (element spacing) my config added extra dits and code got very sloppy.

Obviously this kinda works but keyboard input of CW is not viable in the "production model"

73
Larry

[N2TOH]

I'm working on modifying the code for the keyer to use AS a USB keyboard, I managed to expand the charter table out to most of the printable ASCII charters, but am stuck at including the non-printed "charters" so I can obtain the charrage return and line feed. with the printable charters I managed to create as many as 6 symbol "letters" that worked reliably, I'd like to be able to use as many as 8.

what's confusing me is the formatting in the declarations, once that's understood I should be able to include those additions.