Possible incompatibility w/PowerSDR V2.4.4, Windows 8.1

General discussion and support for the Peaberry SDR V2.

Re: Possible incompatibility w/PowerSDR V2.4.4, Windows 8.1

Postby k1qn » Wed Jul 29, 2015 3:44 pm

Not a hiccup. I was on 20M PeaberryCW and 40M digital with HDSDR last night. I copied and pasted the entire first post on this thread to the Yahoo powersdr group.

One thing I miss from PowerSDR is the ability to see the entire 90kHz spectrum/waterfall display. I can only get about 40kHz with HDSDR. Am I missing something? :-)
Al Gerheim, K1QN
Celebrating 50 years in ham radio!
k1qn
 
Posts: 90
Joined: Sun Oct 20, 2013 9:42 pm

Re: Possible incompatibility w/PowerSDR V2.4.4, Windows 8.1

Postby W4MMP » Wed Jul 29, 2015 4:02 pm

Al,

Set the band width to 96000 in the bandwidth menu and decrease the zoom in the RF window to zero. The most I have been able to see in the audio window (lower window) is 48K even with a 96K audio adapter.

Screenshot 2015-07-29 11.48.36_cr-a.jpg
Screenshot 2015-07-29 11.48.36_cr-a.jpg (146.42 KiB) Viewed 2770 times
73
Ron / W4MMP
W4MMP
 
Posts: 579
Joined: Fri Jan 03, 2014 3:31 pm
Location: Lovettsville, Virginia FM19EG

Re: Possible incompatibility w/PowerSDR V2.4.4, Windows 8.1

Postby k1qn » Wed Jul 29, 2015 4:26 pm

I checked. I'm running V2.7 (up to date). Still only showing 50kHz

ScreenshotHDSDR.jpg
ScreenshotHDSDR.jpg (193.37 KiB) Viewed 2770 times


I only need 5kHz on the lower screen. This is the audio VAC line. I normally set the rate there to 12 kHz.

>now< what am I doing wrong? :-)
Al Gerheim, K1QN
Celebrating 50 years in ham radio!
k1qn
 
Posts: 90
Joined: Sun Oct 20, 2013 9:42 pm

Re: Possible incompatibility w/PowerSDR V2.4.4, Windows 8.1

Postby k1qn » Wed Jul 29, 2015 4:29 pm

I have it now. Audio input from Peaberry set wrong.
Al Gerheim, K1QN
Celebrating 50 years in ham radio!
k1qn
 
Posts: 90
Joined: Sun Oct 20, 2013 9:42 pm

Re: Possible incompatibility w/PowerSDR V2.4.4, Windows 8.1

Postby k1qn » Mon Aug 03, 2015 3:41 pm

Perfect operation for about a week. I don't even check the RF output any more. Hurray for HDSDR!
Al Gerheim, K1QN
Celebrating 50 years in ham radio!
k1qn
 
Posts: 90
Joined: Sun Oct 20, 2013 9:42 pm

Re: Possible incompatibility w/PowerSDR V2.4.4, Windows 8.1

Postby W4MMP » Tue Aug 04, 2015 2:50 am

On Windows, HDSDR is your friend. I have tried all the windows based SDR applications and hands down it is the easiest, most intuitive application available. It does not have all the bells and whistles but what it does, it does very well. But alas HDSDR development appears to have gone the way of the Peaberry V2. There has not been an update since November of 2013.
73
Ron / W4MMP
W4MMP
 
Posts: 579
Joined: Fri Jan 03, 2014 3:31 pm
Location: Lovettsville, Virginia FM19EG

Previous

Return to Peaberry SDR V2

Who is online

Users browsing this forum: No registered users and 1 guest

cron