Part number?

General discussion and support for the Peaberry SDR V2.

Part number?

Postby camqrp » Thu Jan 08, 2015 6:37 am

David - During the process of removing the old PSoC with my heat gun, I melted the key jack. Do you have a DigiKey or Mouser part number so I can order a new one? There are several possible jacks that look the same but they have a variety of pin-outs.

Thanks, Cam N6GA
camqrp
 
Posts: 36
Joined: Tue Oct 07, 2014 12:02 am

Re: Part number?

Postby W4MMP » Sun Jan 11, 2015 3:19 pm

Hi Cam,

In lieu of David replying with a part number, you may want to take a look at this: http://www.digikey.com/scripts/DkSearch ... 0528514302 .

I suppose the only way to find the correct jack is to examine the data sheet and compare it to the physical dimensions and pin outs of the original.
73
Ron / W4MMP
W4MMP
 
Posts: 579
Joined: Fri Jan 03, 2014 3:31 pm
Location: Lovettsville, Virginia FM19EG

Re: Part number?

Postby camqrp » Mon Jan 12, 2015 9:49 pm

Thanks, I found it.
camqrp
 
Posts: 36
Joined: Tue Oct 07, 2014 12:02 am

Re: Part number?

Postby W4MMP » Mon Jan 12, 2015 9:55 pm

What is the part number? Just in case someone else on the board needs one.
73
Ron / W4MMP
W4MMP
 
Posts: 579
Joined: Fri Jan 03, 2014 3:31 pm
Location: Lovettsville, Virginia FM19EG


Return to Peaberry SDR V2

Who is online

Users browsing this forum: Bing [Bot] and 5 guests

cron