current draw on test

General discussion and support for the Peaberry SDR V2.

current draw on test

Postby K0ZYV » Thu May 09, 2013 5:45 pm

The current when testing the power supply is 14.6 ma (within spec)

the current draw after installing the FET mixers U6 and U 8 is still 14.6 after the initial surge.
The voltage on pins 16 of each is 5.05 volts. the test expects 25 - 40 ma. Do I have
a problem?

Paul K0ZYV
Posts: 12
Joined: Sun Jan 06, 2013 9:16 pm

Re: current draw on test

Postby AE9RB » Thu May 09, 2013 7:38 pm

I'll expand the range in the manual.
73 David AE9RB
Site Admin
Posts: 511
Joined: Thu Nov 15, 2012 5:27 am
Location: Portland, Oregon, USA (CN85ql)

Return to Peaberry SDR V2

Who is online

Users browsing this forum: Baidu [Spider] and 5 guests