HDSDR Set Up

[mkatz]

Hey guys

The Peaberry build is completed. Powered up and nothing fried.

I have a few HDSDR q's:

1.) When I tune, the frequency changes on the display but the LO(B) doesn't budge unless I go into ExtIO and tune from there
2.) I'm not sure I have the correct setup

RX Input from Radio = line (Peaberry Radio)
RX Output (Speaker) = Speakers (Peaberry Audio)
TX Input (Microphone) = microphone (Peaberry Audio) - note: I have no microphone plugged into the PB
TX Output to radio (Line(Peaberry Radio)

3.) Should the input be from sound card or LO?

Any assistance is appreciated

Marc, WB2MSC

[AE9RB]

HDSDR will tune the LO without opening ExtIO. I'm no good at debugging closed-source software on operating systems I don't use much, but maybe someone on the SoftRock40 mailing list or the author of HDSDR can help.