Page 1 of 1

L1

PostPosted: Sun Jul 21, 2013 3:34 pm
by john.kg9dk
I am building the V1 of the Peaberry, for 40/30/20 bands. The schematic page 1 shows a L1. The band configuration worksheet does not show L1 being used on the 40/30/20 bands. Can some one enlighten me about L1 for the 40/30/20 band configuration? thanks
John

Re: L1

PostPosted: Sun Jul 21, 2013 4:21 pm
by AE9RB
If you don't see L1 on the schematic worksheet then the file is corrupt. Download a fresh copy and you should see it.

Re: L1

PostPosted: Mon Jul 22, 2013 6:41 pm
by john.kg9dk
I think I have found my point of confusion, I was thinking that L1 and L2 were different, but now I think that they are identically. That is probably true for L6 and L7. The way the L1 and L2 text aligned up with the smaller font showing the band and turns had me thinking that L1 and L2 were different and only use on certain bands. Well it looks like I have a couple more coils to wind.

Re: L1

PostPosted: Mon Jul 22, 2013 6:57 pm
by AE9RB
Yes, L1 and L2 are identical.