Page 1 of 1

UK Help wanted V1

PostPosted: Tue May 28, 2013 9:39 am
by aythorpe
I've just completed building a peaberry v1. The receiver is fine, the tx side appears to work but not on sane frequency as rx. Is there anybody in UK who could get it all working for me.

John G3WCO g3wco@idnet.com

Re: UK Help wanted V1

PostPosted: Tue May 28, 2013 12:14 pm
by CT1IQI
This may be due to a needed reversal of the I and Q signals in transmit mode. Most SDR programmes have an option to set this. This mirrors the signal around the central VFO frequency.