Receiver works brilliant, but I have a problem with a transmit. When PTT is on and test signal is inserted to the peaberry radio interface plugwh:1,0 using the gnu-radio, power consumption increases, transistors get hot and I'm able to read 1.9V sine on the gates of Q7 and Q8. Voltage at Q9 collector is 12.7, Q7 and Q8 drains are 13.5V. However nothing comes out of antenna jack. I've tried to measure a voltage on a 56 ohm dummy load and real antenna, but voltage is 0.
Already lifted and re-wound T5, but voltage at dummy load is still 0V.